有些自上料攪拌車車主遇到問題就進場維修也免不了當了冤大頭。今天，小編就整理了一份超實用的攪拌車常見故障檢查清單，總有一種能夠派上用場。

Some of the owners of self-feeding mixer trucks who come into the site for maintenance when encountering problems will inevitably be the enemy. Today, Xiao Bian has compiled a super practical list of common failures of mixing trucks. There is always one that can be used.

1、散熱器不轉或轉不停

1. The radiator does not turn or does not stop

檢查散熱器保險是否損壞；如果是，則需更換保險絲；

Check whether the radiator fuse is damaged; If yes, replace the fuse;

檢查散熱器溫控感應塞是否損壞；如果是，則需更換溫控感應塞；

Check whether the radiator temperature control sensor plug is damaged; If yes, replace the temperature control sensor plug;

檢查散熱器風扇電機是否損壞；如果是，則需更換電機；

Check whether the radiator fan motor is damaged; If yes, replace the motor;

檢查線路是否斷路或虛接，如果是，則需檢查更換線路。

Check the circuit for open circuit or virtual connection. If yes, check and replace the circuit.

2、罐體轉動無力

2. Can body rotation is weak

檢查液壓油狀態，是否油液太臟；

Check the hydraulic oil status to see if the oil is too dirty;

油門拉線太松；

The accelerator cable is too loose;

檢查液壓油油量，油位低的話，則需補加液壓油至規定油位；

Check the hydraulic oil level. If the oil level is low, add hydraulic oil to the specified level;

檢查液壓泵壓力是否過低。

Check whether the hydraulic pump pressure is too low.

3、拖輪異響

3. Abnormal noise of tugboat

檢查拖輪的保養情況，檢查拖輪及軌道面是否有雜物；

Check the maintenance of the tugboat and check whether there are sundries on the tugboat and track surface;

檢查拖輪與軌道間是否存在間隙，可調整拖輪與軌道面相關角度；

Check whether there is a gap between the tugboat and the rail, and adjust the relevant angle between the tugboat and the rail surface;

查內部軸承是否損壞；

Check whether the internal bearing is damaged;

缺黃油。

Lack of butter.

4、攪拌筒不轉

4. Mixing drum does not rotate

檢查液壓泵受控閥安全銷是否斷裂；

Check whether the safety pin of the controlled valve of the hydraulic pump is broken;

手控閥連接拉桿的球頭螺栓松動或丟失；

The ball stud of the connecting rod of the manual control valve is loose or missing;

檢查液壓油量是否嚴重不足；

Check whether the hydraulic oil is seriously insufficient;

濾芯堵塞，吸油不暢；

The filter element is blocked and the oil absorption is not smooth;

減速機損壞；

The reducer is damaged;

液壓泵損壞；

The hydraulic pump is damaged;

液壓馬達損壞。

The hydraulic motor is damaged.

5、后操縱手柄重

5. Rear joystick weight

拉桿支架缺黃油；

The pull rod bracket is lack of grease;

連接球頭有無松動。

Check whether the ball joint is loose.

6、室內控制器手柄操作重

6. Indoor controller handle operation is heavy

檢查室內控制器拉線是否卡死，角度是否過大；

Check whether the cable of indoor controller is stuck and whether the angle is too large;

檢查拉線包皮有無磨損；

Check whether the cable sheath is worn;

檢查限位螺母是否松動。

Check whether the limit nut is loose.

實用的攪拌車常見故障檢查要點就從6個方面來講解了一番，您有什么問題就來我們網站http://www.www.boy7up.cn咨詢吧！

The inspection points of common failures of practical mixer trucks are explained in six aspects. If you have any questions, please come to our website http://www.www.boy7up.cn Ask!